Shopping Cart

0 item(s) in cart/ total: $0    view cart
Powermaster MSW Heavy Residential or Light Commercial Swing Gate Operator
Powermaster MSW Heavy Residential or Light Commercial Swing Gate Operator

Powermaster MSW Heavy Residential or Light Commercial Swing Gate Operator

Your Price:$1,025.00
Not for Sale
Part Number:PowerMaster-MSW

Choose Options

Options for add with the Operator
Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Kit Receiver and Two Remote Control 433MHz
Kit Receiver 433 MHz (+$79.95)
MONITORED REFLECTIVE PHOTOCELL
Mini-Remote Control model 433 MHz 2-Button
Remote (1) (+$17.50)
Remote (2) (+$35.00)
Remote (5) (+$87.50)
Remote (10) (+$175.00)
Exit Wand
Exit Wand (+$129.95)
KeyPad Wire
KeyPad Wireless
Gooseneck
Phone Entry System (American Access System)
American Access System (+$649.00)
Safety Preform Loop (Require Safety Sensor)
EMX Loop Sensor ( UltraII D-TEK)
EMX Loop Sensor ( UltraII D-TEK) (+$99.00)

PowerMaster MSW Residential Swing Gate Operators kit 1
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
  • Two Mini-Remote Control model 433 MHz 2-Button


PowerMaster MSW Residential Swing Gate Operators kit 2
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
  • Two Mini-Remote Control model 433 MHz 2-Button
  • BFT Photo Cell / Photo Eye with Reflector


PowerMaster MSW Residential Swing Gate Operators kit 3
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
  • Two Mini-Remote Control model 433 MHz 2-Button
  • BFT Photo Cell / Photo Eye with Reflector
  • EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft


PowerMaster MSW Residential Swing Gate Operators kit 4
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet
  • Two Mini-Remote Control model 433 MHz 2-Button
  • BFT Photo Cell / Photo Eye with Reflector
  • EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft
  • Wireless keypad RADIOKEYD 433 MHz


PowerMaster MSW Commercial Swing Gate Operators kit 2C
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
  • Two Mini-Remote Control model 433 MHz 2-Button
  • Allen Bradley 60-2728 Reflective Photo Eye 30' sensing distance


PowerMaster MSW Commercial Swing Gate Operators kit 3C
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
  • Two Mini-Remote Control model 433 MHz 2-Button
  • Allen Bradley 60-2728 Reflective Photo Eye 30' sensing distance
  • EMX Lite Preformed Loop 4x8
  • EMX MVP D-TEK loop detector 9V to 220V AC or DC
  • EMX Loop detectors HAR-11 Pin Harness


PowerMaster MSW Commercial Swing Gate Operators kit 4C
Include:

  • MSW Swing Gate Operator
  • Receiver 433 MHz range of up to 150 feet
  • Two Mini-Remote Control model 433 MHz 2-Button
  • Allen Bradley 60-2728 Reflective Photo Eye 30' sensing distance
  • EMX Lite Preformed Loop 4x8
  • EMX MVP D-TEK loop detector 9V to 220V AC or DC
  • EMX Loop detectors HAR-11 Pin Harness
  • Wireless keypad RADIOKEYD 433 MHz


Swing Gate Operators

Model MSW Swing Gate Operator specifications :

 

Supply Model MSW-51 Swing Gate Operator, rated at 1/2 horse power, 115 VAC., 1Ø operator shall be fully enclosed in a heavy gauge steel, weatherproof cabinet, primed and painted to resist corrosion. The cabinet shall have sufficient room inside to mount optional equipment such as heater elements, radio controls, timers and loop detectors.

Speed reduction shall be provided by an oil-bath type wormgear speed reducer with an adjustable torque limiting clutch on the output shaft. Final output drive shall be a minimum of 1" diameter steel. For manual operation, the gate arm shall be easily disconnected without the use of tools. Adjustable limit switches shall be directly actuated from output shaft, and shall not be affected by removal of motor or by manual operation. The motor shall be of high starting torque, capable of starting or reversing gate from any position. Motor shall be controlled by a solid state switching device and shall be protected from overload by a thermal sensing overload device.

An on/off switch shall be provided on control panel for servicing convenience. Control circuit shall be 24 V and shall provide terminals for field connection of radio controls, obstruction sensing devices, automatic closing timer, three button control stations or single contact control devices. A maximum run timer shall be provided to limit running time in either direction to 28 seconds or less. A delay on reversing shall be provided to reduce shock loading on gate operator. Electrical control panel shall be easily removable for servicing or replacement. Terminal strips shall be provided for connection of all power and control device wiring.

Electrical Specifications:

  • Solid state P.C. board with
  • Custom Programmed Micro Processor for state of the art control.
  • External control input terminal connections for:
    • Radio Receiver
    • Push Button Control Station
    • Key Switches
    • Loop Detectors
    • Card Key Readers
    • Telephone Entry Systems, Etc.
  • Timer to close with 0-60 sec. Adjustment standard.
  • Longer timer available upon request.
  • Maximum run timer for equipment protection (self adjusting).
  • Master/Slave option with dedicated terminal connection provided.
  • Easy Left/Right changeover.
  • Time delay on reverse to insure smooth gate motion and less stress on equipment.
  • Spike suppressing circuitry for surge and lightning protection.
  • Electrical dynamic brake for precise gate positioning.
  • Integral current sensing anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
  • 1/2 HP., 115 Volt AC, 5.5 Amp., 1 phase, instant reversing, switchless, PSC motor, with thermal overload protection for smooth, quiet operation.
  • Internal On/Off power switch.
  • NEMA 1 three-button control station included.

Mechanical Specifications:

  • Heavy duty #13 Ga. Galvanized steel frame providing a strong and durable unit.
  • Hard shell baked-on weather resistant power coating with an attractive textured finish for years of aesthetic protection from the elements.
  • Industrial V-belt primary reduction for smooth quiet operation.
    Heavy duty 30:1 oil bath type gear reducer for long service and dependable operation.
  • #41 Sprocket and roller chain arrangement for final drive reduction.
  • Oil impregnated brass bearings supporting output drive shaft for dependable service with low maintenance.
  • Drive arm easily disconnected for manual operation in case of a power failure.
  • Easy adjustable limit switch cams for precision gate positioning.
  • Soft start and stop at open and close limits of travel due to the inherent geometry of the articulating drive arm linkage.
  • Post or pad mountable for easy installation.

Technical Specifications:

  • Power requirements: 115 Volts, 1 phase.
  • Class 2 low voltage control circuit.
  • Available horse power: 1/2 HP.
  • Maximum gate weight: 800 LBS.
  • Maximum cycles per hour: 24 CPH.
  • Maximum gate width: 16 feet.
  • Gate speed: 12 seconds from open to close.
  • UL 325 Listed for use in Class I through IV application.
  • Shipping weight: approx. 103 LBS.

Optional Equipment:

  • Radio Control.
    Safety Edge (contact safety sensor).
  • Photo Cell (non-contact safety sensor).
  • Loop Detector.
  • Card Key Reader.
  • Gear Box Heater (for cold climates).
  • Interior and Exterior Control Stations:
    • Push Buttons
    • Push Button with Keyed Lockout
    • Key Switches
  • Three Second Advance Audio Warning Signal available upon request.