PowerMaster DSG slide gate openers

The DSG operates vehicular slide gates for commercial and Vehicular Slide Gate Operator DSG industrial applications.

Technical Specifications:

• Power requirements: 115V, 1 Phase
• Available horse power: 1/2 HP
• Class 2 low voltage control circuit.
• Maximum gate weight: 2000 lbs
• Maximum gate width: 50 feet
• Maximum cycles per hour: 60cph / Continuous use
• Gate speed: 11 inches per second
• UL 325 Listed for use in Class I through IV application.
• Shipping weight: Approx. 205 lbs

 Model DSG Slide Gate Operator

Optional Equipment:

• Radio Controls
• Safety Edge (contact safety sensor)
• Photo Cell (non-contact safety sensor)
• Push Buttons with Keyed Lockout
• Loop Detector
• Magnetic Gate Lock
• Gear Box Heater (for cold climates)
• Interior and Exterior Control Stations:
  
  • Push Buttons
  • Push Button with Keyed Lockout
  • Key Switches
• Padlockable Option to secure cover for increased tamper proof protection
• Polyethylene rust and dent proof cover

Electrical Specifications:

• Solid state controller with diagnostic LED s to indicate all input and output functions
• Built-in Radio Receiver
• 3 slots for Plug-in Loop Detectors
• Adjustable Closing Timer
• Maximum Run Timer for equipment protection
• Master/Slave option with dedicated terminal connection provided
• Easy Left/Right changeover
• Spike suppressing circuitry for surge and lightning protection.
• Magnetic gate lock circuitry with control relay
• External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors
• Internal On/Off power switch
• 115 VAC, Convenience receptacle
• NEMA 1 three-button control station included

Mechanical Specification:

• Heavy duty #11 Ga. Galvanized steel frame providing a strong and durable unit.
• 40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
• Heavy duty #50 drive chain with a spring loaded tensioning system for smooth starts, stops, and reversals.
• Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
• Padlockable drive disconnect with brass slide for manual operation in case of power failure.
• Positive chain driven rotary limit switches for precision gate positioning. Settings are never affected by manual operation.
• Post or pad mountable for easy installation.