Powermaster RSW Residential Swing Gate Opener

	PowerMaster RSW 2000 Residential Swing Gate Operators kit 1 Include: RSW 2000 Swing Gate Operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button		PowerMaster RSW 2000 Residential Swing Gate Operators kit 2 Include: RSW 2000 Swing Gate Operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button BFT Photo Cell / Photo Eye with Reflector
	PowerMaster RSW 2000 Residential Swing Gate Operators kit 3 Include: RSW 2000 Swing Gate Operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button BFT Photo Cell / Photo Eye with Reflector EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft		PowerMaster RSW 2000 Residential Swing Gate Operators kit 4 Include: RSW 2000 Swing Gate Operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button BFT Photo Cell / Photo Eye with Reflector EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft Wireless keypad RADIOKEYD  433 MHz

Model RSW Swing Gate Operator

PowerMaster RSW Gate Operators Specifications:

Supply Model RSW-550F Swing Gate Operator, rated at 1/2 horse power, 115VAC., 1Ø, Operator shall be fully enclosed in a heavy gauge steel, weatherproof cabinet, primed and painted to resist corrosion. Primary reduction shall be an industrial duty V-Belt to insure quiet operation. Secondary reduction shall be heavy duty roller chain and sprocket arrangement. Final drive shaft shall be a minimum of 1" in diameter and all shafts shall be supported by maintenance free, bronze oilite bearings. An adjustable de-coupling device shall be incorporated in drive mechanism to limit force exerted by gate arm.

Motor shall be of the instantly reversing type with sufficient torque to start or reverse gate from any position. Motor shall have thermal sensing overload protection. Control circuit operating voltage shall be 24 volts or less and shall provide inputs for single push button control, radio control, loop detector, external obstruction sensing device and limit switches. Limit switches shall be directly actuated by output shaft and shall not be affected by removal of motor or manual operation. Operator shall be easily converted to left or right hand swinging gates.

Electrical Specifications:

• Solid state P.C. board with Custom Programmed Micro Processor for state of the art control.
• External control, input terminal connections for:
  • Radio Receiver
  • Push Button Control Station
  • Key Switches
  • Loop Detectors
  • Card Key Readers
  • Telephone Entry Systems, Etc.
• Timer to close with 0-60 sec. Adjustment standard.
• Longer timer available upon request.
• Maximum run timer for equipment protection (self adjusting).
• Master slave option with dedicated terminal connection provided.
• Easy Left/Right changeover.
• Time delay on reverse to insure smooth gate motion and less stress on equipment.
• Spike suppressing circuitry for surge and lightning protection.
• Electrical dynamic brake for precise gate positioning.
• Integral, current sensing, anti-entrapment circuitry with independent opening and closing sensitivity adjustments.
• External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
• 1/2 HP., 115 Volt AC, 5.5 Amp., 1 phase, instant reversing, switchless, PSC motor, with thermal overload protection for smooth, quiet operation.
• Internal On/Off power switch.
• NEMA 1 one-button control station included.

Mechanical Specifications:

• Heavy duty #11 Ga. Galvanized steel frame providing a strong and durable unit.
• Hard shell, baked-on weather resistant powder coating, with an attractive textured finish, for years of aesthetic protection from the elements.
• Industrial V-belt primary reduction for smooth, quiet operation.
  #65 Sprocket and roller chain arrangement for final drive reduction.
• Oil impregnated brass bearings, supporting output drive shaft, for dependable service with low maintenance.
• Drive arm easily disconnected for manual operation in case of a power failure.
• Easy adjustable limit switch cams for precision gate positioning.
• Soft start and stop at open and close limits of travel, due to the inherent geometry of the articulating drive arm linkage.
• Post or pad mountable for easy installation.

Technical Specifications:

• Power requirements: 115 Volts, 1 Phase
• Class 2 low voltage control circuit
• Available horse power: 1/2 HP
• Maximum gate weight: 350 LBS.
• Maximum cycles per hour: 12 CPH
• Maximum gate width: 12 feet
• Gate speed: 10 seconds from open to close.
• U/L 325 listed for use in Class I through IV applications.
• Shipping weight: approx. 80 LBS.