The Powermaster SG-104 Slide Gate Operator Kit 1 is a high-performance and durable gate automation system designed for medium to heavy sliding gates. Equipped with a 1HP industrial-grade motor, the SG-104 ensures consistent, smooth, and secure operation for homes, businesses, warehouses, and gated communities.
This Kit 1 version includes the Seco-Larm Photo Cell Sensor E-931-S50RRG6Q, providing advanced obstruction detection to prevent accidents and ensure safe gate movement.
Seco-Larm Photo Cell E-931-S50RRG6Q – high-accuracy safety beam sensor
Powermaster SG-104 1HP Gate Operator – durable, weather-resistant, and powerful
Heavy-duty 1HP slide gate motor for demanding environments
Compatible with 115V/230V power input
Seco-Larm photo cell included for safety compliance
Smooth and quiet gate motion
Rugged steel construction & weather-sealed components
Simple wiring and setup for professional installers
Works with most access control devices (keypads, receivers, remotes, loops)
Perfect for commercial, industrial, and high-traffic residential use
Verify voltage compatibility (115/230V).
Install the operator on a solid concrete pad.
Ensure the gate slides freely before mounting the motor.
Wire and align the Seco-Larm photo cell E-931-S50RRG6Q.
Set motor travel limits and adjust open/close speed if needed.
Test full gate travel and verify safety sensor operation.
Connect additional access devices as required.
Product should be installed by trained professionals.
Disconnect power before performing service or wiring.
Do not allow children to operate the gate.
Regularly test the photo cell safety sensor.
Do not operate a damaged or obstructed gate.
Follow all local safety and gate installation regulations.
Lubricate gate rollers and track periodically.
Test photo cell alignment every month.
Add surge protection to protect control board electronics.
Keep the area around the gate path clear of debris.
Combine with loop detectors for enhanced automation.
